How to Replace a UPVC Door Replacement Lock

If your door lock jams or isn't functioning in the way it should, you may be looking to replace it. It might seem difficult but the process is easy and doesn't require a locksmith professional.

A few basic tools and a little patience, and a lot of care will do the trick. Here's how you do it:

Take a measurement of the door

If you're having trouble locking your uPVC door, or it won't close or lock properly, it may be time for a replacement. If you've recently moved into a new home, a tenant left without returning keys, or your multipoint gearbox is showing signs of wear and tear, changing the barrel of your lock to an entirely new one will offer an extra layer of security.

Before purchasing a new lock, you'll need to make sure you have key measurements to ensure the new cylinder is properly fitted and doesn't compromise your home security. The most crucial of these is the backset. This is the distance that lies between the middle of the keyhole bore hole and the edge of your door. It's typically 2 3/8 or 2 3/4 inches. Use an measuring tape or ruler to measure this measurement and write the results on paper or a notepad.

You'll also have to know the faceplate's width. This is the thickness that the faceplate covers the mechanism of the lock. If possible, purchase a replacement lock made by the same manufacturer since they will be manufactured to the same measurements. If you cannot find the name of the manufacturer or mark, just measure the width of the existing cylinder. You can also measure the width of the existing cylinder by placing a pencil on the keyhole.

Once you have the dimensions, you can start removing the old cylinder. Begin by loosening the screw holding the handle with a Phillips-head driver, then loosen the screws holding the interior and exterior handles to one another. After you have removed these screws, you can pull out the barrel screw on the exterior handle to release the cylinder.

If the cylinder is stuck in the lock, you can try WD-40 or another oil or lubricant. It is crucial not to push it out. Forcing it out can cause damage to your lock's internal gearbox. You may also want to think about upgrading to a lock that has anti-snap and anti bump protection, which is more resistant to attacks from thieves.

Source the Lock

When you are looking to purchase a new door lock you should consider some aspects. Make sure you have the correct size cylinder for your door and ensure you're purchasing from a trusted brand to ensure a proper fit and high-quality. You'll also require a few essential tools to complete the job, such as a screwdriver, tape measure and rubber mallet.

There are a variety of signs that your lock made of upvc is worn out and must be replaced. The most common signs are visible damage to the lock or a handle that is loose and isn't fitting properly. If the lock is jamming, or isn't locking at all, it's time for a replacement.

The correct installation of the lock is important once you've chosen the correct lock. This will ensure that it locks and works properly. Follow the manufacturer's instructions when installing the multipoint lock mechanism in the upvc panel. Attach the appropriate faceplates, handles, and other components. Test the mechanism by locking the door and then unlocking it from the inside and outside. If all looks good you're ready to celebrate your accomplishment.

It might seem daunting to replace a Upvc lock however, you can do it yourself with the assistance of locksmith. It's easy to replace your lock if you know the signs and have the right tools.

Remember that like any moving component, a upvc door lock will benefit from some lubrication to ensure it runs smoothly. A few sprays of silicone or a graphite powder lubricant will help to prolong their lifespan by ensuring they're free of excessive friction that can wear them down prematurely. Regular cleaning of your door lock mechanisms with WD-40 and a damp cloth will help to keep them in good condition.

Take the Cylinder off

It is possible to replace the lock barrel in case you're experiencing issues with your door made of upvc. This is a simple DIY project and can be done in just a few minutes. It's also an effective way to maintain the security of your home. The most important thing to remember is identifying the brand of your existing lock so that you can find an appropriate replacement.

A damaged door lock can be a real pain and a significant security risk. It's not uncommon for locks on uPVC doors to fail and it's essential to keep up with regular maintenance. Experts recommend that you replace patio door lock your lock every seven years. If your lock is undergoing significant damage or you're not happy with its performance, it's worth seeking help from an expert.

In the majority of cases, a simple pin-based system, referred to as a euro cylinder is used to construct uPVC doors. They are simple to use and are not likely to fail, but they are still vulnerable. It's therefore worth replacing upvc door lock and handle your lock with a modern lock that is equipped with anti-snap, anti-bump and anti-snap security to stop burglaries.

The first step to change your uPVC lock is to remove the handle and expose the old cylinder. It can be tricky because screws are usually hidden under the handles. Make sure you have your screwdriver at hand. You'll then want to gently tug and wiggle the cylindrical until it is loose. When it does you can remove it from its socket.

Once you've sourced a suitable replacement, it's just an issue of screwing it into place and then reverse the removal procedure. You should not overtighten the lock, as this can cause the cylinder in the door to get stuck and stop functioning as it should. Once everything is back in place, test the uPVC door replacement lock by opening and closing it both inside and outside. You should be able now to lock and unlock the door with your key. If you don't, check that the screws are tight and try again.

Install the Lock

You'll need to do a bit of research first to make sure the lock you choose is appropriate for your door. You'll be required to be aware of the faceplate and backset measurements - which is the distance from the edge of the patio door lock replacement to the centre of the handle or cylinder - and the lock type to ensure that the lock is fitted correctly without compromising security.

Once you've finished this, UPVC Door Replacement Lock you're now ready to start installing the new lock. You should ideally prop the door open, or lock it so that it doesn't close during the installation process. First, loosen the screws that hold the handle together using a Phillips-head screwdriver. After that, you should be able to pull the inner and outer handle apart.

You can now remove the old cylinder by unscrewing it. After removing the cylinder install the new lock. Make sure you adhere to the guidelines that are specific to your particular model. Once the lock is in place you can test it by shutting and opening the door from both the inside and the outside, then locking and unlocking it from inside and trying it again.

There are many reasons to consider to change the locks on your uPVC door. It could be because you've recently moved in and haven't got a key, or that the previous tenant didn't return it or you may need to upgrade to an extra secure lock. It shouldn't take more than five minutes to change the lock's cylinder.

No matter if your uPVC doors are equipped with single-point or multipoint locks, they all have the same basic mechanism. There are some issues that can arise, such as the failure to close or a jam. This can be due to wear and tear, weather conditions or simply from everyday use. Luckily, most of these problems can be resolved with some minor maintenance or by enlisting the assistance of locksmith.