Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. However, if you have double glazed window repairs-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this case you'll need locate some plastic spacers that will help the new pane to fit properly into the window repairs near me frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap between the door and the window is substantial, you may want to use security screens that has windows. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to open the windows to get at the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Most often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform an initial test to ensure that it fits. The corner joints of the sash must be aligned with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is essential to act if you wake up every morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens with an ease. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's very simple to change the hinges on a window repairs near me but it's much easier if someone helps you to hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause gaps to develop between the sash and the frame. If they are damaged beyond repair, it may be necessary to have them realigned. In addition, the interlock could also become disaligned. It is located on the hinge side and could require to be cleaned. In certain instances it is possible to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be placed on the windowsill on top. They can help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will provide a great level of security and insulation for your home. It is important to remember that all windows eventually wear out and it could be more cost-effective to replace them instead of fixing them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as possible.