Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. However, if you have double glazed window repairs pane windows that are secured by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers in order to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window repairs and test it for fit. If you're happy with the fit, tighten the screws to ensure they remain in the right place.

If you are unable to reposition the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is essential to replace your seal as quickly as you can to keep your uPVC window repairs waterproof and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close your window and do an initial test fit. The corners of the sash need to be aligned with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any DIY expert. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is important to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely that the problem is related to the seal, not the frame. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze it could be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a very simple procedure, but it is simpler with someone else to help hold the frame in place.

Check that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be happy to give you advice.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window repairs getting stuck and stop corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also due to wear and tear could become misaligned. This will cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it may be required to realign them. Second, the interlock can be unbalanced. It is located on the hinge's side and might require to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. They can help block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than fix them. If you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.