Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They don't get rotten or rusty like aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. However when you have double glazed window repairs near me pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation you'll need to locate some plastic spacers that will help the new pane to fit properly into the frame of the window.

If you're planning to try to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not onto the floor and could be trampled under.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from getting into your home until a professional comes out to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of problems including sliding. A window that is sagging can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to open the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure they stay in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. The first step is to close the window and perform a test fit. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking might need to be removed. It is essential to remember that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with a breeze it could be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is essentially a very simple process, but it's simpler when you have a person to help you hold the frame up.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or by a poor installation in the factory. This can often be resolved by sending us a photo through our website and we will be more than happy to give you suggestions.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause an opening to appear where the sash meets the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. The interlock, which is on the hinge side of the window repair near me, may also be misaligned, and again it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are usually fabric tubes that are filled with some kind of filler. They can be put on top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair windows made of upvc will provide an excellent level of insulation and security for your home. It is crucial to recognize that all windows have a life span and they may reach the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window you should consult an expert as soon as you can.