Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass is removed from the window repairs near me, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

upvc window repair is a durable and energy efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need to open the window to get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it could be caused by the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and floors that are wet. Windows that leak water do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be put on. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens in an ease. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is an easy process but it can be easier to do with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be pleased to offer you advice.

Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. The hinges can also be unbalanced due to wear, which can cause an opening between the frame and sash. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more economical to replace them than repair them. If you encounter any issues with your Upvc window you should consult a professional immediately.