Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and may even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If windows with double panes are held in place by internal beading, it will be more difficult to remove the old panes and put in new ones. In this situation you'll need to source some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is substantial, you may need to consider security screens that includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems, including sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. Then, using a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window repair near me to check the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close your window and do a test to ensure that it fits. The corner joints of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window repair near me is difficult to open, or if it opens with an ease. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. Changing a window hinge is an easy process but it can be easier with someone else to help hold the frame in place.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photograph on our website. We will be pleased to offer you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become unbalanced due to wear, which can cause a gap where the sash and frame meet. These can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window and can be misaligned. Again, it's possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. If you are experiencing problems with your upvc window repairs near me windows, it is always recommended to seek help from a professional as soon as you can.