Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable possession from theft. This system is discrete and doesn't require additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to create a unique pin code sequence that can be changed up to 20 times. This allows your vehicle to begin.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are many different types of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. While a tracking system can help you find your car in the case of theft, it can not prevent the crime from occurring in the first instance. Immobilisers, on the other hand, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to take your vehicle.

By using the buttons that are already present in your car The ghost device is able to create an unique sequence that must be entered before the engine starts. This can be done via the indicator stalk, window or heater buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the need to use the button sequence. This feature is particularly useful when you need to surrender your car for valet parking or maintenance, as the immobiliser is active and not deactivated.

The Ghost is an unique and innovative device that operates with the buttons on your vehicle rather than as a standalone unit. This means it's not just a powerful security measure against theft from your vehicle but it can also be transferred over to any future cars you may own, making it more valuable than traditional steering wheel locks.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your pride & joy from key hacking and cloning. It also blocks ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices, Ghost Immobiliser Problems which are a common method used by car thieves to get around immobilisers.

The benefit of using CAN data is that it runs silently compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console or doors, to create unique sequences for disarming. This sequence can be extended to up to 20 presses for extra security. The iPhone app permits only one, authenticated connection using a pairing code that is unique to the ghost immobiliser problems (Atavi.com) and the communication between the two devices is encrypted.

The Ghost prevents car thieves adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to start only if the correct pin code is entered. It can be temporarily operated in the Valet/Service mode (with parameters set such as a 30mph speed limit), so you can hand your car to a valet or service without having to enter an entry code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car ghost immobiliser from starting normally until you enter a specific code. The system can be activated or deactivated using your own smartphone application without the need for wires.

The factory-installed immobilisers function by using a transponder, which is embedded in the key. This sends a message to the ECU. If the correct code is sent the car will start, but if a transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle be started and stolen. The ghost vehicle immobiliser immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning, and even key theft. Only by physically towing your car away could a thief get it, and they would still not be able to drive it.

Ghost 2 immobiliser makes use of buttons on your vehicle, including the indicator stalk, steering wheel, and door panels, to generate a unique PIN code which must be entered to use your car. This is done without the need for extra hardware such as keys-fobs, Ghost Immobiliser Problems and can last up to 20 presses long. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.

Ghost is harder to remove than car alarms, which require disarming by pressing the buttons. This makes it a great addition to a GPS tracking device, which can be used to track your vehicle after it's stolen.

Emergency PIN code override

You don't have to look very far on social media to find stories or videos about cars that were stolen using the latest technology tools. This includes key-cloning devices and hacking tools that allow them to start the vehicle without the original keys.

The Ghost immobiliser has been specifically designed to prevent this, and give you an extra layer of security in order to protect your vehicle from being targeted by thieves. It creates an unique pin code push sequence from your existing buttons on the steering wheel, door panel, and the center console. This unique PIN must be entered together with your original key fob to prevent the vehicle from starting. The unique override pin is on the black card that you will receive following your installation and is easy to remember as there are no LED indications.

The device is hidden in the vehicle's wires and does not emit radio signals, therefore it isn't able to be identified by modern thieves using diagnostic software that can recognise what type of security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Unlike other security systems, which use a relay in engine bays, immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending a digital block of commands for both the ECU and the engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems, however this must be stated prior to the installation of the device. They also work with valet/service modes and is a great alternative to a tracking device when you take your car to the dealer for an electrical issue.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen from owners without keys. It is more easy than ever to steal your pride and joy due to the availability of key cloning devices and door lock picks. To stop this, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been hijacked.

It communicates directly with your car's ECU (Engine Control Unit) via the CAN data loop. It is completely silent, since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also prevents the addition of the key to a new one or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden in your vehicle and is accessed by existing buttons on your steering wheel, centre console and door panels. Before you can start your car, you need to enter a unique and reversible PIN number that is up to 20 digits.

This is the very first aftermarket CAN-bus immobiliser that was created. It can prevent your vehicle from being driven or even started in the event that you do not enter a PIN number first. If the device is in armed and you try to drive away, it will display a warning on your dash which will flash continuously for about 300m. If you enter your PIN code during this time, it will disarm the anti-hijack and your car will continue to operate just as normal. If you don't enter your PIN in this moment, the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.