Fitting a cat flap can seem intimidating however it's actually quite simple to install with the right instructions. Firstly, determine how high you want the flap to be (on average or belly height). Mark this point on your door, and use the included template to guide you when drilling.

If you have a small kitten, prop the door slightly open and gradually allow it to go through. Reward it when it goes through.

Take a measurement of the door

A cat flap is an excellent option to allow your pet to move into and out of your home as it wants. This will help keep your cat in good health by ensuring that it is getting exercise as well as being able to get back inside if left outside in the rainy weather, especially in winter. It can also reduce the amount of time you need to let it out or in and can also keep your home safe by letting you know when it has gone out.

It is crucial to ensure that the cat flap is set up correctly to stop your pet from being forced through or escaping through it by other animals (e.g. dogs). It is crucial to determine the height of your pet's belly as well as the entrance to your home so that you can make sure that the flap is at the proper height. You can alter the height of your flap in case your cat is taller or less than average.

The next step is to use a spirit level to mark the center of the door. This is where you will install the flap. Then, using the markings as a guideline, cut out the contour of your flap with the aid of a jigsaw. Once you have cut out the door, sand the edges of the door to create smooth surfaces and drill any fixing holes required.

Installing a cat flap ought to not take longer than two hours. However, the process could be slightly more complicated in the event that you have to put it onto the door of a uPVC or composite door as these doors come with a wide range of thicknesses, which affect how the holes are cut and the type of door they are fixed into. This is why we always recommend hiring a professional to carry out the work, particularly in the event that you've never worked with glass before.

Measure Your double glazing cat flap

You will not have to spend hours of ignoring the cat's meows to be let in or out. This is particularly helpful if your cat is trapped inside during the winter months while you are at work.

If you want to fit a cat flap inside your door, it is crucial to measure your cat before attempting the task. Although it might seem like to be a simple task, it is essential to get the measurement right or your cat flap glass door installation near me will find it difficult to use.

First, ensure that your cat is relaxed and not anxious prior to taking the measurements. You'll need to hold them in a manner that they cannot move and also ensure that the measuring tape or ruler is flat against their body and not arching in any places. By keeping the measuring tape or ruler against their body from their head to the tip of their tail can allow you to determine an exact measurement.

Once you've got the measurement of your cat, it is time to take a look at the door and decide where you want to place the flap. The best option is to place the flap in the middle of your cat's stomach as it will allow them to get through it without much effort. This will also stop the flap from making a lot of noise as it swings open and closed.

You should also think about the thickness and the structure of the uPVC door or composite. While all timber doors have a similar thickness, uPVC or composite doors are different in their overall structure. This could make the process of the installation of an enclosure for your cat more difficult as you have to make sure that the hole is the right size.

It is also worthwhile reading through the directions included with the kit to find an illustration template that can be used to determine the location of the hole inside the door. This will help you determine where the opening must be, and also to make sure that the template is correctly positioned on the door. Utilizing a spirit level to check that the template is flush against the door can be very helpful.

Cut the Flap

Before you can put in your cat flap you have to cut the door's panel to make a space big enough to accommodate it. This can be a challenging job, and it is recommended to get help from a professional cat flap fitter for Fitting a cat flap this job if you don't have the knowledge or skills to tackle it yourself. You can also refer to the instructions included in the kit to find out how to do it properly.

You can use the height of your cat's or kitten's stomach as a reference. A good guideline is to set the cat flap about 10-15 centimeters from the ground as this is the typical belly height for cats. Your cat will be able to go through the flap comfortably and also give any other cats or curious neighbours a tough time trying to enter or leave.

Mark the position of the cat flap on the door using the pencil. If your kit has the template, place it over the door. Utilize the markings on the template to drill holes at each corner. You should then be able to cut out the shape of the template and replace it with your cat flap installers flap.

You can install the cat flap yourself in a wood or uPVC door If you're comfortable using the Jigsaw. Be cautious not to cut through the mullions or rails that run vertically of your door. You can use a jigsaw cut the panel into a circle or square according to the design of your cat flap. Be patient, and don't make the jigsaw cut faster.

Once the hole is made, carefully place the cat flap into its new place of residence. Make sure that it is solidly secured. If the flap has screws put them on the protruding bolts. Once the screws are in place, sand any rough edges of the cut then apply sealant to any gaps to ensure there aren't any draughts entering into your home.

Install the Flap

If you have an ordinary cat flap, you can help your pet through it by placing a small amount cat food on the front of the door. Alternatively you can try pushing the cat through using your hands or a stick. Once your cat is accustomed to walking through the flap, it should be able to go in and out as it wishes, so you can let it in or out without having to be there holding the door open for it all day (and Fitting a cat flap potentially in any weather).

You can install the flap onto an UPVC or glass door but it's not exactly the same as fitting one into a timber external door since the UPVC doors and some glass doors don't have a consistent thickness. This can affect the way you cut the hole for the flap, and can also affect whether your flap fits correctly once it's been installed.

Depending on the model of cat flap you pick It may include a mounting kit as well as a template that will show exactly where to drill holes for it. If the kit does not include an example you can use a photocopier to create your own. It's important not to push the jigsaw too hard when cutting, so it doesn't make a larger than needed hole in your door.

Most cat flaps are square or rectangular in shape, but there are some that are circular and these are generally more difficult to place. If you have a circular flap it is essential to ensure that the hole is in the correct position on your door because in the event that it's not, the cat won't be able to use it and may be stuck in the open all day (or even at night).

Some models of cat flap have locks which allow you to manage when your cat comes and goes. This is useful when your cat is scared of going out in the dark or returning to the house at night. They can also be helpful if you work all day. Certain locks can be used for access or exit, and others can be locked in both directions. This is beneficial for older cats or sick cats who don't want to venture out in cold weather.