Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors regularly. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is important to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame of the previous one easily. However If you have double glazed window repairs near me pane windows that are held in place by internal beading it will be more difficult to get rid of the old panes and put in new ones. In this instance you'll need source some plastic spacers to assist the new pane to fit properly into the window frame.

If you plan attempt to remove the glass panes yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor and could be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. With the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. It is crucial to replace your seal as quickly as you can to ensure that your upvc window repair near me window watertight and draughtproof.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and then perform an experiment to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window repair. The fungus thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily fixed by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your Upvc Window Repair window is difficult to open or if it opens with a breeze. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It is an easy process, but it's easier with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. You can check this by looking for the arrow on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be happy to give you advice.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the chance of windows getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become unbalanced due to wear, causing a gap where the sash meets frame. This can be easily repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them re-aligned or replaced. The interlock, which is located on the hinge side of the window, can also be misaligned, and again it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen draughts.

One of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be placed on top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

Your upvc window repairs near me windows can continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach the point when it's more efficient to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek help from a professional immediately.