sash style double glazed windows Lock Door Handles

If you're looking to increase the security of your home without compromising aesthetics choose sash lock door handles. They can be used with a mortice latch or sliding sash windows lock, and can be combined with a night latch to provide additional security for doors that are internal.

These handles consist of a lever/handle on backplates and are typically used with a three or five lever mortice lock. They can also be used with tubular latches.

Lever Lock Handles

There are many kinds of lever handles that can be matched to any style. The rustic lever locks are very popular in both farmhouse-style and modern homes. Classic lever handles are circular or spherical, and are simple to grasp. They are simple, affordable and can be used with any home design. For an elegant style, choose polished chrome or a satin nickel handle. These finishes are durable and easy to clean. Other options include antique bronze and polished brass. Many handles have a decorative design, such as small amber worm eyes, or long-horned crystals. Some levers have pins, stars or any other design molded into the bottom.

To replace the lever lock door handles you must have the right screwdriver, or tool to remove them. You may require an awl, or a nail based on the model and style. Some lever handles have an apex or notch on the opposite side of the base that can be used to break it open.

Once you have the correct tool Follow the instructions of the manufacturer to remove your existing handles. Examine the spindle of your new lever. Doors that have been morticed (cut into the door) for previous latches or locks, and must be fitted to a specific spindle size. Most lever handle manufacturers offer a standardized door handle spindle size.

If you are replacing a sash lock door handle, the old handle must be removed, and the tubular latch bolt that is located in the door, must be removed from the strike plate inside the door frame. The latch bolt needs to be inserted into an opening in the door's frame and connected to the strike plate.

It is crucial to remember that when you install a new lever handle the handles that comply with the ADA (Americans with Disabilities Act), are designed to operate with a hand. The user should not be required to grip tightly or turn their wrists. To meet ADA compliance standards the lever door handle can't be operated with fingers and thumbs or the entire hand.

Sash Lock Handles

The primary function of sash lock door handles is to pull the moving sashes together to form a seal. This prevents drafts from entering the room and helps maintain indoor temperatures, which can help save energy bills throughout the year. These locks are great for doors that do not require for a keyed lock.

Sash locks are often referred to as mortice sashlocks. They incorporate a latch and dead bolt into a single case that is inserted in the material of the door. They work in conjunction with a pair of door handles and are available in a variety of different options available to fit your home.

The lever locks are operated by a lever that has a hole cut in the backplate below. This allows a key to be inserted into the mortice sash to turn it. This lock is usually used on non-locking interior doors like those in dining rooms and living rooms. However, it can also be utilized with a tubular lock to provide the security of the door.

These are designed to hold the sash together at multiple points, and feature hooks that fit inside the keeper. They come in a variety of styles and designs that are suitable for different types of windows like sliding sash window or hinged casement windows. Some are made from cast aluminium while others are made of brass or wrought iron. They're available in a variety of finishes to complement other components of your door furniture for instance, escutcheons that secure the keyhole.

The 3 lever sash locks only suitable for doors that are internal. They don't provide the security level required by insurance companies. They are also less resistant to forced entry than their 5 lever equivalents, making them more vulnerable.

A door sash that has five levers is the best choice for exterior doors. It provides higher levels of resistance to forced entry and is harder to pick or bypass. The locks are upgraded in design that's been tested and certified to meet stringent security, fire and disability regulations.

The first step in replacing the handle of a timber sash windows lock is to remove the old fastener by removing the screws from both ends. Be sure to have a screwdriver on hand and separate the parts carefully so as not to damage them. Mark with a pencil the location of the screw holes to ensure that you place the new fastener properly when you are putting it on. Remove any dust or flickers of paint and then screw the new fastener into place. It is essential to test the handle to ensure it is working correctly and makes a an encapsulated seal.

Tubular Latch Handles

The tubular latch is an internal latch that is operated by turning the handle. It is designed to close a door but does not lock it as mortices. They are typically used on doors that are internal and no locking is required. They can be fitted with lever or knob handles.

There are a variety of sizes of tubular latches available. The sizes range from the economy to the high-end architectural. The size of the door depends on its purpose and whether it has a lock. For example, a bathroom door may need to have a thumbturn and release mechanism in the event of an emergency, so you'll need an latch that can be locked.

The backset of your door will influence the latch you choose. You will need to choose a latch that has a backset measurement that matches the distance between the edge and the centre of your door's hole for the handle rose or knob. This will ensure that the door knobs or handles operate the latch with ease.

If you are installing a knob or lever that has a spring or not spring, it's important that you select a heavy-duty tubular latch. It must have an elongated follower that is double-sprung. This will ensure a smooth latch action and will prevent it from becoming sluggish or unresponsive after regular use.

The next step is to install the latch on the door. The first step is to ensure that the latch is aligned to the top of the door frame/casing. Note the location of the plate and drill holes. Using a countersink drill bit can help create the right recess to rest comfortably in.

After the latch has been installed, you can fix it into the door. Before installing your locks or handles it is crucial to ensure that the latch is working properly. To check, open and close the door a few times. If it's not functioning correctly, try lubricating it with WD40 and re-trying it. If you continue to experience problems, it might be necessary to speak with an expert locksmith or installer.

Keyhole Handles

The keyhole handles are used with a tubular latch installed inside the door. The latch is used to open and close the door. The handle engages the latch when pushed down and then releases it when pulled up. These types of handles are usually used on doors with internal openings such as living rooms and doors for dining rooms, but they can also be used on front doors if they are paired with a nightlatch.

Door knobs are more contemporary handles that include a sprung lever/handle with an oval or round fixing stem and a thumb-turn or escutcheon. They are available in a variety of styles and finishes to suit the doors in your home. They can be used in conjunction with Euro cylinders or multipoint locking systems to provide added security. This is accomplished by locking the door at multiple points on the height of the door. Compatible door handles require the correct size of the lock's center to fit the barrel.

A keyhole escutcheon covers the keyhole on the door to conceal it and give the handle a more stylish look. They can be purchased as an open-top or screw-on style and come in a variety of styles to match your door handle. Alternatively, a recessed escutcheon can be fitted to the door's edge to further hide the keyhole and provide an updated look.

The majority of the handles described above are designed to be used with either a mortice lock or sash lock mechanism, however certain handles are compatible with Euro cylinder locks as well. These handles are suitable for uPVC door and require handles that have the Euro cylinder hole and screw holes in the backplate. These handles may also require a Euro-cylinder escutcheon, or a standard escutcheon, depending on the application.

It's important to know the differences between a mortice lock or mortice lock and a tubular latch, and also the compatibility requirements for each. You'll need to consider the door thickness and door hinges, as well as frame reinforcements as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.