Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If windows with double glazed window repairs near me panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the fabric rather than on the floor where they can be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional comes out to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash windows. As time passes, they may be affected by a variety of issues that include sagging. A window repair that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to get to the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in place.

If you aren't able to move the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need close the window and then perform a test fit. The corners of the sash must be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and wet floors. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most often, uPVC window repair near me leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. A upvc window repair near me specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze It could be the hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a very simple procedure, but it is easier when you have a person to help hold the frame up.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window repair near me a certain way or due to inadequate installation at the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by different things. First, the hinges due to wear and tear may become displaced, which causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it may be necessary to have them realigned. Second, the interlock can also become misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace these.

The second most frequent cause of draughts is the window seals, these are prone to wear or damaged over time and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and window repairs will lessen the risk of draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be put on top of your windowsill. They will help block out cold air and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.