Sliding Patio Doors Repair

Patio doors that slide open are ideal for enjoying your outdoor space, but they can be difficult to open and close. This can be caused by various issues, such as dirty tracks or misaligned sliders.

Clean and lubricate your rollers. You can also adjust the rollers using adjustment holes on the bottom side of the door panel that can be moved.

Dirty or Damaged Track

A sliding door that doesn't slide as it should can be due to an unclean or damaged track. Over time, dirt, grit, and even rust can build up and block the track from being able to slide smoothly. The solution is to clean the track thoroughly with a brush and mild detergent. It is recommended to complete this task regularly to ensure the smooth operation of your door and avoid the need for costly repairs down the road.

A leaking door is another common problem that requires immediate attention to prevent mold growth, water damage and structural degradation. The problem is often caused by worn weather strips and a misaligned door. This can be corrected by replacing the old weather stripping and sliding patio doors repair aligning the doors.

Rollers that jump off the track are a problem that is often solved with a few minutes of DIY work. This is a task that can be challenging, so ask a friend to help you. Stand inside the house, and lean a panel toward you to reposition the rollers. To stop the panel from falling, put it on sawhorses after it has been removed from the bottom track. Then, loosen each of the roller's screws and then pry them out using a screwdriver. Now, you can get rid of any dirt that has accumulated between the wheels and tracks. Then, clean each wheel using denatured alcohol and a rag, then reposition the wheels and reattach them to their tracks.

It's possible to straighten bent sections of track with a mallet made of rubber and a piece of wood. If the bent section is near hinges or has the potential to cause further damage, it's recommended to call in a professional.

Misaligned Rollers

If your sliding door has a problem sliding, it's likely that the rollers are not aligned correctly. The wheels may be dirty or rusted, and their bearings are worn down. This friction causes the door to catch and grind when opened or closed. This can also cause squeaking sounds.

This is a simple fix. The wheels are mounted on the bracket, which can be adjusted, so you don't have to remove the door. Utilize a screwdriver to find the holes for adjustment on the frame (usually on either side). Turn the screws to turn the wheels. Turning the screw clockwise will raise the wheel while turning it counterclockwise lowers it. Continue adjusting the door until it opens and closes easily.

It is essential to adjust the wheel before making adjustments to your latch. The latch hooks have to be aligned with the strike plate (the opening through which the latch locks) to allow the lock to function correctly. If you don't, the latch may open or close while you're not in the room.

Sliding patio doors are a significant investment, and making sure they are functioning correctly helps keep your family safe and secure. You can avoid costly who repairs sliding patio doors by fixing problems that are common, like broken rollers, tracks and handles. Contact our team for more information about patio doors. We can assess your sliding patio door repair needs and assist you in keeping it in top condition. Our experts can also help with any replacement parts that you might require.

Damaged or loosely hung door frame

Sliding patio doors are a wonderful addition to any home. They provide a stylish and practical alternative to hinged or swing-open patio glass door repair near me door options. Like any other hardware item, sliding patio doors can develop problems in time. Fortunately, most of these issues are easy to fix with a bit of DIY knowledge.

A gap in the frame is a common problem with sliding patio doors. It could be due to a variety of factors, including an improperly aligned track or rollers or a damaged track door, or a bent door frame. In most cases, the cause of this issue is easily remedied by removing the door and re-attaching the track or rolling elements. It is crucial to be cautious not to cause damage to either the frame or the track.

In some cases it may be necessary for the entire track to be replaced. This can be accomplished easily using the universal kit that is available in most major hardware stores. These kits are simple to install and will have your door back to normal in no time.

It is essential to check the frame of your sliding door and hardware for signs of wear and tear, like loose bolts or screws. They can usually be tightened with a screwdriver, or wrench which makes this a simple and efficient DIY patio door maintenance step. It is also crucial to oil the rollers and tracks of your patio door to ensure smooth operation and prevent premature wear.

For many homeowners the patio doors are the primary access to their backyard and outdoor living space. As such, they need to to function correctly to ensure the safety of their home and provide security. If you follow these easy DIY maintenance tips, homeowners can prolong the lifespan of their sliding patio glass repair near me door and reduce costly repairs or replacements.

Handle is not working properly

Sliding patio doors are the perfect way to access your backyard and to enter your home, but they aren't always easy to operate if they are damaged or misaligned. A damaged handle could cause the door to not shut or open properly. Repairing a damaged handle can be accomplished at home.

In many instances, a loose handle is the result of screws working through the backplate. To fix the problem, tighten the screws on the inside handle with the help of a screwdriver. If the handle is still loose it could indicate that the threads have worn away and need to be replaced.

Or, a damaged latch could be the cause. It is more likely that the latch will break if it's made of metal instead of plastic. Try applying lubrication to the latch if it is not turning or catching. If not, you may have to replace the lock completely.

If the handle is cracked or broken, it can be difficult to operate. If this is the case it is essential to replace it with a new handle that matches the style of your sliding patio door.

Whether your patio doors are old and outdated or new and brand new, Feldco can help you get them back on track. We have high-quality doors available in different sizes and styles that can be fitted to perfectly fit your home. Contact us today to learn more about our doors! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

If you're seeing light around windows and doors that are closed or feel a draft pulling on the window or door, it's time to replace your weather stripping. The strips form an airtight seal that stops unwanted air, pests and water from entering your home. This keeps your heated and conditioned air inside, saving you money on energy bills.

It may have lost its positive seal, bouncy, due to aging. It is easy to determine this by running a dollar bill under the seal on the top and bottom of the jamb as well as door frame where they overlap. If the dollar bill slides effortlessly between the seal and the door is the time to replace the weather stripping.

If you replace only the worn-out section of weather stripping, it could cause problems in the future with the seal. It's much more effective to replace the entire stripping, so that you are able to rest that your door is sealed again.

Follow our DIY guide to weather stripping to put the correct material on your sliding patio door, and frame to ensure a strong and lasting seal. This is a great method for you to save energy costs and also fix your sliding patio door. Don't wait until it's too late. You'll reduce your expenses and enhance the appearance of your home.